DIR-878
Changing LAN IPv4 Address
This configuration step is available for the Access point, Repeater, and
Client modes.
1. Select the Automatic obtainment of IPv4 address to let DIR-878
automatically obtain the LAN IPv4 address.
If the router obtains the LAN IPv4 address automatically, then after
!
finishing the Wizard you can access the web-based interface using the
domain name (by default, dlinkrouter.local ) with a dot at the end.
If you want to manually assign the LAN IPv4 address for DIR-878, do not
select the Automatic obtainment of IPv4 address checkbox and fill in
the IP address and Netmask fields and, if needed, the Gateway IP
address field. Make sure that the assigned address does not coincide with the
LAN IPv4 address of the router to which your device connects.
2. Click the NEXT button.
Quick Installation Guide
21