D-Link DVG-6004S User Manual page 7

DVG-6004S User's Manual
Rear Panel
1. Line Port (1-4): Connect to your phones using standard phone cabling (RJ-11).
2. USB: Connect to a 3G/4G USB dongle or a printer, this feature is an option.
3. LAN: Connect to your Ethernet enabled computers using Ethernet cabling.
4. WAN: Connect to your broadband modem using an Ethernet cable.
5. Ground: A conducting connection with the earth. Connect with the ground so as to make the earth a
part of an electrical circuit using metal wire.
6. Power Receptor: Receptor for the provided power adapter.
7. Power Switch: Press it down to turn on DVG.
Use Reset Button to restore factory default settings:
1. Press and hold the reset button for 6 seconds and Alarm Indicator will be blinking fast
2. Release the reset button. Factory settings will be restored.
Telephone Interface Description
6