0 and put the iron on its heel. - If the supply cord is damaged, it must be replaced by Philips or its service agent or a similarly qualified person in order to avoid a hazard.
- When you do not know what kind of fabric(s) the article is made of, try to iron on a spot which will be invisible when you wear it. - Silk, woolen and synthetic materials: iron the reverse side of the fabric to prevent shiny spots.To prevent stains, avoid using the spray...
Drip Stop (types GC3135, GC3130, GC3126, GC3125, GC3120, GC3115 only) This iron features a "Drip Stop" steam shut-off facility: the iron automatically stops steaming at too low temperatures to prevent water from dripping out of the soleplate.When this happens you may hear a...
Page 7
- The red auto-off pilot light will go out.The amber temperature pilot lightmay come on, depending on the soleplate temperature. - If the amber pilot light comes on after the iron is moved, wait for it to go out before start ironing.
- Plug in the iron to let the soleplate dry up. - Unplug the iron when the amber pilot light has gone out. - Move the hot iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate.
Page 9
Store the iron standing on its heel in a safe and dry place. Guarantee & service If you need information or if you have a problem, please visit the Philips Web site at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet).
Please read the different sections for more details. If you are unable to solve the problem, please contact the nearest Philips Service Centre or one of its representatives. See the worldwide guarantee leaflet for telephone numbers of the Philips Helpdesk or visit our website at www.philipsonline.com.