Monitor[:State] - HP E1343A User Manual

:MONitor[:STATe]

Parameters
Comments
Example
54 Relay Multiplexer Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DISPlay:MONitor[:STATe] <
Parameter Name
mode
< >
•
Monitoring Switchbox Channels:
DISPlay:MONitor[:STATe] 1
state of the selected module.
DISPlay:MONitor[:STATe] 0
•
Selecting the Module to be Monitored:
Use the DISPlay:MONitor:CARD <
module.
•
Monitor Mode on an HP E1301A Mainframe Display: The following
shows the monitor mode on the display of an HP E1301 Mainframe.
SWITCH_112: Chan: 0,1, , , , , , , , ,
The example shows that channels 00 and 01 are closed.
•
*RST Condition:
DISPlay:MONitor[:STATe] OFF|0
Enabling the Monitor Mode
DISP:MON:CARD 2
DISP:MON 1
mode turns the monitor mode on or off.
>
Parameter Type
boolean
DISPlay:MONitor[:STATe] ON
turns the monitor mode
DISPlay:MONitor[:STATe] OFF
turns the monitor mode
number >| AUTO
Selects module #2 in a switchbox.
Turns the monitor mode on.
Range of Values
0 |1|ON|OFF
or
to show the channel
ON
or
OFF .
command to select the