1MRS757274
2.
2.1.
Station Automation COM600 3.5
External OPC Server User's Manual
Introduction
Functional overview
The External OPC Server provides methods for connecting data from 3rd party OPC
DA server to COM600.
Figure 2.1-1 System overview
1. Station Automation Builder 600 (SAB600)
2. COM600
3. NCC (Network Control Center)
4. 3rd party system with an OPC DA Server
5. Protection and control devices
The External OPC Server is intended for connecting external systems to the COM600
device with OPC. The external system needs an OPC DA Server with version 2.0 support.
The External OPC Server software has two parts: Engineering and diagnostic tools and
the actual External OPC Server. Engineering and diagnostic tools utilize the Station
Automation Builder 600 (later referred to as SAB600) framework and provide the user
interface for engineering and diagnosing the External OPC Server. The External OPC
Server handles the data transfer between the 3rd party OPC server and COM600 OPC
clients. It has OPC DA Client that connects to the 3rd party OPC server and OPC DA
and A&E server that publishes the data for the COM600 OPC clients.
overview.jpg
11