Canon imagePASS-R1 Service Manual page 71

A message appears that indicates that the installation has started.
NOTE:
After confirming the LED activity starts and the LED display shows the cyclic codes (C1 > C2 > C3 > C1...), turn off the printer
using the main power switch on the front.
Once the installation is complete, the imagePASS will shut down automatically.
13. Flip both of the imagePASS service switches to the Normal (OFF) position.
No.
1 Flip the service switches from Service (ON) position...
2 ...to Normal mode (OFF) position.
14. Disconnect the Ethernet cable from the imagePASS network port and the Windows computer.
15. Reconnect all the cables that were connected to the imagePASS.
1
Figure 32: Flipping the imagePASS service switches
66
4. INSTALLING SYSTEM SOFTWARE
2
Name