Do not assemble the spinner when there is food residue left around the container.
●
Do not replace any parts of the appliance with non-genuine spare parts.
●
Do not carry the appliance by holding the power cord, feeding tube or container. When
●
carrying the appliance, be sure to hold the motor housing with both hands.
Do not insert any object in the gaps of the appliance.
●
Do not use prohibited ingredients as stated in this instructions. (P. EN6)
●
Unplug the plug when the appliance is not in use.
●
Make sure to hold the power plug when unplugging it. Never pull on the power cord.
●
Beware not to trip over or get caught in the power cord while in use.
●
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance
●
must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
Care shall be taken when handling the spinner and during cleaning. Do not clean the
●
spinner by bare hand.
Always disconnect the appliance from the supply if it is left unattended and before
●
assembling, disassembling, moving or cleaning.
Switch off the appliance and disconnect from supply before changing attachments or
●
approaching parts that move in use.
Ensure to operate and rest the appliance as stated on specification table. (P. EN9
●
"Specifications")
Ensure to clean the appliance especially surfaces in contact with food after use. (P. EN8
●
"After Use")
This product is intended for household use only.
●
● Do not use the appliance outdoors.
● Do not use the appliance for commercial purpose.
● Do not place the juicer jug on any heat sources or in a microwave.
● Do not drop the appliance or attachments to avoid damaging it.
● Do not wrap the power cord around the motor housing.
● Make sure the parts or attachments are set firmly before use.
● Do not operate the appliance without ingredients.
EN4
JZ50H168_MJ-CS100HK_20221005.indb 4
JZ50H168_MJ-CS100HK_20221005.indb 4
Safety Precautions
CAUTION
Important Information
Please make sure to
follow these instructions.
2023-01-05 19:37:57
2023-01-05 19:37:57