Advertisement
• A wireless network connection via Plug & Access is not supported. Use a different method such as entering a password or WPS
to establish a wireless network connection.
• Soft APs are not supported. Use Wi-Fi Direct to connect mobile devices to the TV directly.
• Installing the Evolution Kit may reset some of the existing TV settings.
Attaching the Evolution Kit to a TV
First, check the network status and ensure there is an Internet connection. Internet access is required to use the Evolution Kit.
✎
Remove the USB device from the TV before installing the Evolution Kit. If the USB device is connected to the TV, the Evolution
✎
Kit may not be installed properly.
By mounting the Evolution Kit onto your existing Samsung TV, you can upgrade the TV's software without purchasing a new TV. Use the
Evolution Kit to unlock the new features and services offered by Samsung Electronics.
1. The TV must first be updated to the latest software version. Navigate to Software Update (Support > Software Update) and
update the software using the Online.
2. Turn off the TV.
3. Unplug the TV's power cable.
4.
Insert the evolution kit into the two slots as shown in the diagram below,
1
1 1
[SEK-1000]BN68-05216E-01L02.indb 3
and then attach to the TV.
2
2
English-3
2013-07-26
4:41:50
Advertisement
