Mounting
Preparation:
Wipe all dirt (oil, dust, etc.) off the mounting
surface, and dry any moisture.
Mounting the I/F Box on the
carpet, etc.
Note:
Do not mount the I/F Box in the following locations.
Doing so may cause a malfunction.
Where exposed to water
Where the unit may be stepped on
Very dusty place
Near a heater duct or object that generates heat
Where exposed to direct sunlight
Where heat builds up such as beneath the carpet
30
30
Velcro tape
Wiring
When disconnecting a locked cable, press the
lock in the arrowed direction while removing the
connector.
Pulling too strongly will
break the connector. Check
that the lock is disengaged
before trying to disconnect
the connector.
How to attach a clip connector
Insert the cable into the clip
connector.
Vehicle-side wiring cable
Battery lead of this product
(Example)
Press the element into place.
Close the cover.
Power
connector