Receiving A Fax Manually - Panasonic KX-FPG371 Operating Instructions Manual

Receiving Faxes

Receiving a fax manually

Receiving Faxes
Activating TEL mode
{FAX/START} {AUTO ANSWER}
{DIGITAL SP-PHONE}
{TALK}
{SP-PHONE}
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} until the following is
displayed.
62
{STOP}
ON
TEL MODE
OFF
How to receive calls using the
base unit
1
When the fax machine rings, press
{ { { { DIGITAL SP-PHONE} } } } or lift the handset
and press { { { { TALK} } } } or { { { { SP-PHONE} } } } to
answer the call.
2
When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press { { { { FAX/START} } } } .
L The unit will start fax reception.
How to receive calls using the
handset
1
When the fax machine rings, lift the
handset and press { { { { TALK} } } } or { { { { SP-
PHONE} } } } .
2
When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press { { { { * * * * }{ }{ }{ }{# # # # }{ }{ }{ }{9} } } } (pre-
selected fax activation code) firmly.
L A single beep will be heard.
L The unit will start fax reception.
Note:
L To receive fax documents using the handset,
you must set the remote fax activation to on
(feature #41, page 90) beforehand.
L You can change the fax activation code in
feature #41 (page 90).
L If you do not answer the call within 10 rings,
the unit will temporarily activate the
answering device. The greeting message will
then be played and the other party can then
send a fax.
To stop receiving
Press { { { { STOP} } } } .
CONNECTING.....