Panasonic Toughbook CF-U1AQB1G2M Operating Instructions Manual page 36

Reinstalling Software
5 Press
screen is displayed.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
6 Set the Product Recovery DVD-ROM into the CD/DVD drive.
7 Select the [Exit] menu, then select your CD/DVD drive in
[Boot Override].
8 Press
The computer will restart.
9 Select [Reinstall Windows] and press
The License Agreement screen appears.
10 Select [Yes, I agree to the provisions above and wish to
continue!] and press
11 Select the settings and press
[Reinstall Windows to the whole Hard Disk to factory default.]
You will have a single partition.
[Reinstall Windows to the operating system partition.]
You can keep the partition structure.
12 At the confi rmation message, press
Reinstallation starts automatically. (It will take approximately 30 - 120 min-
utes.)
Do not interrupt reinstallation, for example by turning off the computer or
pressing
become unavailable as Windows may not start up or the data may be
corrupted.
13 Remove the Product Recovery DVD-ROM, and then select
[OK] and press
remove the CD/DVD drive.
14 Turn on the computer.
If the password is requested, enter the Supervisor Password.
15 Perform the steps 3, 4, 5 and 7 for setting up the computer
( pages 25 to 30).
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
36
+ (F2) or
(Enter).
,
and +
(Enter) to turn off the computer, then
+ (Del) while [Panasonic] boot
(Enter).
(Enter).
(Del). Otherwise reinstallation may
(Enter).
(Enter).