Panasonic Toughbook CF-U1AQB1G2M Operating Instructions Manual page 38

Troubleshooting (Basic)
 Starting Up
The date and time
are incorrect.
[Executing Battery
Recalibration]
screen appears.
[Enter Password]
does not appear
when resuming from
sleep (
/standby
( ) or
hibernation.
38
 Make the correct settings.
Click (Start) - [Control Panel] - [Clock, Language, and
Region] - [Date and Time].
Click [start] - [Control Panel] - [Date, Time, Language, and
Regional Options] - [Date and Time].
 If the problem persists, the internal clock battery may need
to be replaced. Contact Panasonic Technical Support (
page 54).
 When the computer is connected to LAN, check the date
and time of the server.
 The 2100 A.D. or later year will not be correctly recognized
on this computer.
 The Battery Recalibration was canceled before Windows
was shut down last time. To start up Windows, turn off the
computer by the power switch, and then turn on.
 The password you have set in the Setup Utility is not
requested at resuming. To use the password security at
)
resuming, set the Windows password.
A Click
accounts] and select the account, and set the pass-
word.
B Click
tenance] - [Require a password when the computer
wakes] and add a check mark for [Require a pass-
word].
 Set the Windows password. The password you have set in
the Setup Utility is not requested at resuming.
A Click [start] - [Control Panel] - [User Accounts] and
select the account, and set the password.
B Click [start] - [Control Panel] - [Performance and Main-
tenance] - [Power Options] - [Advanced] and add a
check mark for [Prompt for password when computer
resumes from standby].
(Start) - [Control Panel] - [Add or remove user
(Start) - [Control Panel] - [System and Main-