Panasonic Toughbook CF-19KHRAG2M Reference Manual page 54

LAN
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility (
73).
2
In [Caution], press
3
Press , and then select [Yes] and press
F10
4
Log on to Windows as an administrator.
5
Click (Start) - [Computer] - [System Properties] - [Device Manager], double-click [Net-
work adapters] - [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller], and click
[Advanced].
6
Click [Wake From Shutdown] in [Property] and select [On] in [Value], and then click [OK].
NOTE
The computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make the
setting by the following steps.
Click (Start) - [Computer] - [System Properties] - [Device Manager], double-click [Network adapters] - [Marvell
A
Yukon 88E8055 PCI-E Gigabit Ethernet Controller], and click [Advanced].
Click [Wake Up Capabilities] in [Property] and select [Magic Pocket] in [Value], and then click [OK].
B
.
Enter
.
Enter
54
page