Remote Control Transmitter - Panasonic Viera TH-50VX100 Operating Instructions Manual

Basic Controls

Remote Control Transmitter

POS. /SIZE button
(see page 31)
Standby (ON / OFF) button
The Plasma Display must first be plugged
into the wall outlet and turned on at the
power switch (see page 13).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
FUNCTION button
(see page 17)
OK button
Press to make selections.
POSITION buttons
PC button
Press to select PC input. (see page 14)
DIRECT INPUT buttons
Press the each button to select
the INPUT mode. (see page 14)
This button is used to switch
directly to INPUT mode.
INPUT button
(see page 14)
VIDEO MENU button
Press to select PICTURE MENU.
(see page 21)
STANDARD
MONITOR
EXT.SCALER button
(see page 17)
ASPECT button
Press to adjust the aspect.
(see page 18)
Numeric buttons
(see page 27)
MEM. LOAD button
(see page 27)
External equipment operations
(see page 43)
16
DISPLAY
FUNCTION
PC
CH
EXT.SCALER
DYNAMIC
CINEMA
POS.
/SIZE PICTURE
COMPO.
HDMI
VIDEO
INPUT
MENU
OFF TIMER
MEM.
LOAD
DISPLAY
PICTURE button
(see page 21)
LIGHT button
Lights the INPUT and VIDEO MENU
buttons for 5 seconds. Makes the
selected remote control mode key
(DISPLAY, VCR, DBS/CBL or DVD) flash
three times. Press again to turn off the
INPUT and VIDEO MENU button lights.
Equipment (Remote control mode)
selection buttons (see page 43, 44)
MENU button
Displays menu screen. (see page 19)
RETURN button (see page 19)
Press the RETURN button to return to
previous menu screen.
COMPO. button
Press to select COMPONENT or RGB
input. (see page 14)
OFF TIMER button
The Plasma Display can be preset to
switch to stand-by after a fixed period.
The setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
30 60
0
When three minutes remain, "OFF
TIMER 3" will flash.
The off timer is cancelled if a power
interruption occurs.
RECALL button
Press to display the current system status.
1
Input label
2
Aspect mode (see page 18)
3
Off timer
The off timer indicator is displayed
only when the off timer has been set.
PC
4:3
OFF TIMER 90
90
1
2
3