global_main.book.book Page 17 Friday, February 24, 2023 1:51 PM
4)
Repeat this process for each one of the gas
taps.
Ring of Panel
c
By-pass Screw
e
Tap
g
CAUTION
• Do not dismantle the tap shaft: in the event of a
malfunction, change the whole tap.
• Before placing the burners back on the top
place, make sure that the injector is not blocked.
• A full operational test and a test for possible
leakages must be carried out after gas
conversion (such as soap water or gas detector).
• After completing conversion, a qualified
technician or installer has to mark "V" on the
right gas category to match with the setting in
rating label. Remove the previous setting "V"
mark.
INSTALLATION
17