Setting Up Network Projection
96
To locate the projector by IP address, select
■
projector address
Enter the IP address for the projector in the format shown.
Enter a password for the projector if one has been set. Then
click
Connect
5. If you need to pause your presentation, press the
Click
when you are ready to continue.
Resume
6. When you want to disconnect from the projector, click the
button.
Disconnect
Vista Network Projector Limitations
When you connect wirelessly to the projector using Vista Network
Projector, be aware of the following limitations:
You can connect to only one projector at a time.
■
You cannot connect the projector to a PC with a video output
■
resolution in excess of 1024 × 768 (XGA).
You cannot project a Windows Photo Gallery slideshow in
■
full-screen mode.
When using the optional network projector feature of the
■
Meeting Space function, set the display color quality on your PC
to Highest (32-bit).
■
Network presentation via wireless ad-hoc is not supported.
. You see this screen:
.
Enter the
button.
Pause