Connections; Connecting The Access Point To The Internet - Sony PCWA-A100 Operating Instructions Manual

Connect ions
12
Downloaded from:

Connecting the Access Point to the Internet

Connection to the Internet varies depending on your Internet
environment. If you are using the Access Point for your local network
only, and you do not need to connect it the Internet, proceed to page 16
and see To use the Access Point for your local network only.
Note
You must select Cable Modem/xDSL or ISDN Router/LAN connection
mode before connecting the Access Point to a LAN that has a DHCP server.
See the Wireless LAN PC Card Operating Instructions to configurate the
connection mode.
To connect the Access Point to the telephone line
Connecting the Access Point to a telephone line provides multiple
computers containing the Wireless LAN PC Card with Internet access
via the internal modem of the Access Point; thus, no connections are
required among the computer, modem, or telephone line. The Access
Point connection allows up to 16 computers to share a single telephone
line for Internet access. (However, you can use only one Internet
Service Provider.)
1
Connect the telephone cable to the LINE/PHONE connector.
Telephone jack
splitter (supplied)
To the telephone
line outlet
https://www.usersmanualguide.com/
Telephone cable
(supplied)
DC IN 5V
LINE/
PHONE
To LINE/PHONE connector