Table of Contents
Advertisement
on Start / reload to press.
5.
12.6 Abort the program
on Start / reload to press.
1.
The cooling process starts
automatically after about 30
seconds and cools the laundry
while the drum is rotating. If you
want to avoid or cancel the cool
down process, open the door.
→
"Display ", page 18
Open the appliance door.
2.
Remove the laundry
3.
→ Page 29 .
12.7 Remove the laundry
Open the appliance door.
1.
Remove the laundry.
2.
12.8 Switch off the device
Open the program selector Out put.
▶
12.9 Lint filter
During drying, the lint from the
laundry is collected in the lint filter.
The lint filter protects the appliance
from lint.
Clean the fluff filter
When the drying program has ended
or the display shows a message
during operation, clean the fluff filter.
Notice: If you do not clean the device
as described, the device function can
be impaired.
requirements
¡ After drying, the display shows
nen: "End"
¡ or during operation:.
Open the door.
1.
s
Basic operation de
Remove the fluff from the door.
2.
Remove the two-part lint filter.
3.
Remove the fluff from the recess.
4th
Make sure that no lint falls into the
air duct.
29
Advertisement
Table of Contents
