METPOINT
®
CID
12.3.4 Device settings
All settings are password-protected!
You will generally need to confirm settings and changes with "OK"!
Note:
If you go back to the main menu and then come back to one of the settings screens,
you will need to enter the password again!
Home -> Settings
12.3.4.1 Setting a password
Home -> Settings -> Password settings
36 | 56
Overview of settings
Default password (factory settings): 0000 (4 x zero).
You can change this password in the password settings if necessary.
You will need to enter the new password two times in a row and confirm it
with OK.
If you enter the wrong password, the Enter Password or Enter new Password
screen will appear with red text.
If you have forgotten the password, you can assign a new one by entering
the master password.
The master password is provided with the device documentation.
Original installation and operation manual