Huawei Telecom Power TP48200A-HX09A3 User Manual page 16

TP48200A-HX09A3, TP48200A-HX09A4,
TBC300A-DCA3, TBC300A-DCA5 and
TBC300A-TCA2 Telecom Power
User Manual

Using Ladders





When climbing a ladder, take the following precautions to reduce risks and ensure safety:
Issue 04 (2019-11-15)
Do not drag steel ropes and hoisting tools or bump hoisted objects against hard objects
during hoisting.
Use wooden or fiberglass ladders when you need to perform live working at heights.
When a step ladder is used, ensure that the pull ropes are secured and the ladder is held
firm.
Before using a ladder, check that it is intact and confirm its load bearing capacity. Do not
overload it.
Ensure that the wider end of the ladder is at the bottom, or protective measures have
been taken at the bottom to prevent the ladder from sliding.
Ensure that the ladder is securely positioned. The recommended angle for a ladder
against the floor is 75 degrees, as shown in the following figure. An angle rule can be
used to measure the angle.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
9