Canon LX-P1300 User Manual page 67

3
Adjust the density.
1
2
4
Complete the setting procedure.
Click [OK] in the printer driver setup window.
When printing begins, the document will be printed at the adjusted density.
NOTE
• [Density] can not be adjusted when the [Monochrome Print] check box is selected.
Changing Print Quality and Adjusting Color
1. Adjust the density by moving the slider.
The center of the slidebar is the default position
(0). The slider can be moved between -50 to
+50.
The more you move the slider to the left, the
lower the density becomes. The more you
move the slider to the right, the higher the
density becomes.
A value can be directly entered in the entry box
interlocked with the slider as shown on the left.
2. Click [OK].
61