Cherry G80-3000N RGB TKL - Corded TKL Keyboard Manual

Table of Contents

Contents

1 Overview
2 Before you begin...
3 For your safety
4 Connecting keyboard
5 Calling up additional functions
6 Changing the light effects
- 6.1 Changing the color of the light effects
- 6.2 Setting colors for single key illumination
7 Resetting the keyboard to its original delivery state
8 Cleaning the keyboard
9 If the keyboard is not working
10 Disposing of the device
11 Technical data
12 CONTACT
13 Documents / Resources
- 13.1 References
- 13.2 Download manual

Overview

Device Overview

Change light effect

Backlighting on/off (when you switch backlighting on again, the keys are lit with the most recently set brightness.)

Backlighting darker

Backlighting brighter

Light effect slower

Light effect faster

Win Lock = lock/unlock the following keys and key combinations: Windows key, menu key, ALT + F4, ALT + Tab, ALT GR + Tab, CTRL + ALT + DEL

Volume down

Sound on/off

Volume up

FN key + END = start/end setting mode for single key illumination

FN key for sub-function of the F keys

FN key + spacebar = setting mode for single color light effect

Before you begin...

Every device is different!
The operating instructions contain information on effective and reliable use.

Read the operating instructions carefully.
Keep the operating instructions and pass them on to other users.

The CHERRY G80-3000N RGB TKL is a keyboard for operating computers.
For information on other products, downloads and much more, visit us at www.cherry.de.

For your safety

RSI stands for "Repetitive Strain Injury"
RSI arises due to small movements continuously repeated over a long period of time.

Set up your workspace ergonomically.
Select a comfortable inclination of the keyboard using the adjusting the feet on the bottom.
Take several short breaks, with stretching exercises if necessary.
Change your posture often.

Connecting keyboard

Connect the keyboard to the USB port of the PC/ laptop.
The keyboard is ready to use without installing any software.

Calling up additional functions

The symbols for the additional functions are on the F3 to F12 keys.

To call up the function press the FN key and the appropriate key.
Example:
To switch backlighting on or off, press the FN key and F4 ().
To constantly activate the FN key, press the CTRL and FN keys at the same time.

Changing the light effects

Changing the color of the light effects

Press the FN key and the F3 key ( ) repeatedly until a single-color light effect appears.
Press the FN key and the spacebar.
The keys light up in different colors.
Press the key with the desired color.
All single-color effects now light up in that color.

Setting colors for single key illumination

Switch to single key illumination mode by pressing the FN key and the F3 key ( ) repeatedly until the backlighting glows white and the WASD and cursor keys glow red (factory setting).
Press the FN key and the END key simultaneously.
Press the key whose illumination you want to change until it lights up in the desired color.

Change the color of other keys if necessary.

Save the settings by pressing the FN key and the END key.

Resetting the keyboard to its original delivery state

Press and hold the FN key and PAUSE key for 5 seconds.
The original delivery state is restored.

Cleaning the keyboard

Switch off the PC/laptop or pull out the keyboard plug.

warning
NOTE! Aggressive cleaning agents and liquids can damage the keyboard

Do not use solvents such as gasoline or alcohol and scouring agents or scouring sponges for cleaning.
Prevent liquids from entering the keyboard.
Do not remove the key caps of the keyboard.

Clean the keyboard with a slightly damp cloth and some mild cleaning agent (e.g. dishwashing liquid).
Dry off the keyboard with a soft, lint-free cloth.

If the keyboard is not working

Use another USB port on the PC/laptop.
To make sure that the keyboard is not defective, test it if possible with another PC/laptop.
Set the option "USB Keyboard Support" or "USB
Legacy Mode" to "enabled" in the BIOS of the PC.

Disposing of the device

Dispose of the device in accordance with the legal regulations.

Technical data

Designation	Value
Supply voltage	5.0 V/DC ±5% SELV
Current consumption	Max. 500 mA
Storage temperature	-20°C... +60°C
Operating temperature	0°C... +50°C

CONTACT

Cherry GmbH
Cherrystraße 91275 Auerbach/OPf.
Germany
Internet: www.cherry.de

For USA:
Cherry Americas, LLC
5732 95th Avenue
Suite 850
Kenosha, WI 53144
USA
Tel.: +1 262 942 6508
Email: sales@cherryamericas.com
Internet: www.cherryamericas.com

Leave us a comment
#cherrykeyboards

	facebook.com/ORG.CHERRY
	twitter.com/org_cherry
	blog.cherry.de
	youtube.com/channel/UChsaJqZnGDZ_Nq1v9-261NQ
	instagram.com/cherry_original
	xing.com/companies/cherrygmbh
	linkedin.com/company/cherry-