Mounting On The Ceiling; Mounting In A False Floor Or A Duct - Siemens FDA2 Series Planning, Mounting

3.1.1 Mounting on the ceiling

3.1.2 Mounting in a false floor or a duct

A6V11783979_en--_a
The air below the ceiling is usually aspirated through a pipe system.
Fig. 4: Mounting on the ceiling
1 Fastening with plastic clamps
2 Fastening onto existing components
The air in the false floor or the duct is usually aspirated through a pipe system.
Fig. 5: Mounting in a false floor or a duct
1 Fastening onto existing components
2 Upright stand pipes
3 Plastic clamps on mounts
3
System description
Air aspiration
25...100 mm
2
1
2
3
17 | 48
1