Power Board Ovc3000 And Ovc3000Eos; Ovc3000 Version For Microwave Ovens (Emc Shielded); Revisions - Electrolux OVC3000 Service Manual

16 - POWER BOARD OVC3000 AND OVC3000EOS

From the beginning of 2012 so progressive in the various factories began to use the new power board
OVC3000EOS instead of OVC3000. The new power board has a low power consumption in stand-by to
return to the regulations on the reduction of energy consumption and has a new spare part code (see spare
parts catalogs for the various models) instead do not change the characteristics and functions.

17 - OVC3000 VERSION FOR MICROWAVE OVENS (EMC SHIELDED)

The power boards OVC3000 used in microwave ovens, in order to avoid electromagnetic interference that
could block the card was added a screen to eliminate these electromagnetic interference (see Fig. 55 and
56).
Fig. 55

18 - REVISIONS

Revision Date
00 02/2011
01 08/2013
Technical Support - BSP
Description
Document Creation
- Modified the Index on page 4
- Modified Chapter 13.2 - ALARM CODE
LIST (added codes and references pages)
on page 30.
- Modified Chapter 13.3 - ALARM DISPLAY
AND TROUBLESHOOTING in reference to
the code F908 and add Note on page 32; in
reference to the code F321, F322, F323 and
F324 on page 34; in reference to the code
F325, F326, F327, F928 and F329 on page
35; in reference to the code F130 and F232
on page 36; in reference to the code F241
on page 37.
- Modified Chapter 14 - EXAMPLE OF
CIRCUIT DIAGRAM FOR DIFFERENT
APPLICATIONS added Note on page 39.
- Modified Chapter 15.1 - DEMO MODE IN
THE UI "VISION VCU" on page 44;
- Added Chapter 16 - POWER BOARD
OVC3000 AND OVC3000EOS on page 46.
- Added Chapter 17 - OVC3000 VERSION
FOR MICROWAVE OVENS (EMC
SHIELDED) on page 46.
- Modified Chapter 18 - REVISIONS on page
46.
Fig. 56
Author
FV
FV
46/47
Approved by - on
599 73 09-98 Rev. 02