Siemens SINAMICS S120 Manual page 109
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
The maximum cable length is 30 m.
Note
The two "+" or "M" terminals are jumpered in the connector. This ensures that the supply voltage
is looped through.
This power supply is required for the digital outputs only.
The electronics power supply and the power supply for the analog inputs/outputs are taken from
the option slot of the Control Unit.
Note
The power supply of the digital outputs and the electronics power supply of the Control Unit are
isolated.
Note
If the 24 V supply is briefly interrupted, then the digital outputs are deactivated during this time.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Option boards
5.5 Terminal Board TB30
107
Advertisement
Table of Contents
