Setup An Event Action - Motorola HMUG1080 User Manual

Working with the MHM Program

Setup an Event Action

Use this procedure to configure devices to notify you when an event occurs.
1 Click
2 Select a device from the Choose Sensor Device drop-down menu. This determines
the device that monitors the area.
3 Choose an event from the Choose Event drop-down menu. The type of event selected
corresponds to the type of sensor device selected. For example, if you selected a Wired
Camera, then you can choose Motion Detected as an event to monitor. The next two
steps are optional.
4 If you want one device to trigger another, select one from the Choose Action Device
drop-down menu. For example, if you selected a Door/Window Sensor for Choose
Sensor Device, then you could activate a camera as the Action Device. This way, when
the sensor is triggered, a camera will record the event.
If you do not want another device triggered, be sure None is selected.
Home Monitoring & Control System
from the main menu.
35 MHM User Guide