2.4.5 Registration unit
The registration roller is driven by the registration mult
between the registration roller and the registration mul
roller in order to match paper and an image on the dru
roller in order to match paper and an image on the dru
Jam removal lever
■ Specification
■ Specification
1) Skew in Simplex
-. Top Skew : 1.5 mm
-. Side Skew : 2.0 mm
2) Dog Ear, Trees, Nicks, Wrinkling
-. Special Media : 1/500
3) Margin
-. Top Margin : 4.23 ± 1.5 mm ( Tray3, 4, HCF
-. Side Margin : 4.23 ± 1.5 mm ( Tray3, 4, HCF
-. Duplex Top Margin : 4.23 ± 2.0 mm ( Tray3
- Duplex Side Margin : 4 23 ± 2 0 mm ( Tray3
. Duplex Side Margin : 4.23 ± 2.0 mm ( Tray3
Service Manual
2. Product d
description
ti motor. The registration clutch (CL6) is located
lti motor, and it controls ON/OFF of the registration
um at the predetermined registration point.
um at the predetermined registration point
Sha
aft-regi
Regi sensor
detection sensor
F : 4.23 ± 2.0 mm )
F : 4.23 ± 2.0 mm )
, 4, HCF : 4.23 ± 2.0 mm )
3 4 HCF : 4 23 ± 2 0 mm )
3, 4, HCF : 4.23 ± 2.0 mm )
2-2
29
Regi roller
Transparency
SAMSUNG ELECTRONICS