Bosch XDK110 Connection Manual page 11

Connect XDK110 device to your Azure IoT services 11 | 16
4.7.3.4. Select the 'Overview' page to view the incoming data from your device. Please keep in mind that at times it might
take few seconds to represent the data as graphs.
4.7.3.5. You use the 'Settings' page to change the intervals at which the sensors has to be sampled, telemetry data to be
posted and the heart beat message has to be posted.
You can set the intervals to Zero to stop the corresponding operations.
4.7.3.6. The 'Command' page will let you reboot your device by selecting the 'Run' button within the 'Command/reboot'
section. You can see the response within the history pane by clicking the command history link
Data subject not change without notice | Printed in Germany | December 2020 BCDS