Replacing The Shaving Heads - Philips NORELCO 7700 Manual

ENGLISH
34
4 Turn the shaver OFF. Shake off excess
water and allow trimmer to air dry
thoroughly.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with one drop of mineral
oil every 6 months.
Cleaning the Beard Styler
Clean the beard styler after each use.
C
1 Pull the comb off the beard styler.
Make sure to grab the comb in the center. Do not
pull at the sides of the comb.
C
2 Rinse the beard styler and comb under
hot water. BUT BE CAREFUL TO TEST
WATER FIRST SO AS NOT TO BURN OR
SCALD HANDS.
3 Shake off excess water and allow beard
styler and comb to air dry thoroughly.
Tip: For optimal performance, lubricate the beard
styler teeth with one drop of mineral
oil every 6 months.

Replacing the Shaving Heads

Q Replace the shaving heads once a year for
optimal shaving results.
Q Replace damaged or worn shaving heads with
model SH70 Philips Norelco shaving heads
only.
Replacement Shaving Heads
Indication
C
Q The shaving heads symbol lights up
continuously when the shaver is turned off to
remind you to replace your shaving heads to
obtain optimal shaving results.
C
1 Pull the top portion of the shaving unit
straight off the shaver.
C
2 Turn the retaining ring counterclockwise
2
(1) and lift it off the shaving head (2).
1
C
3 Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
ENGLISH
35