Advertisement
Name of each component • Control panel
Name of each component
Handlebar
Handle
Lock
Caster
6
Precautions for use
The temperature display value of the transit box is the value at the temperature sensing probe in the display box.
•
Although the displayed temperature may differ from the actual temperature in the center of the transit box from time
to time, it will gradually approach the actual temperature.
Clean the transit box with diluted neutral detergent. Brush, acid, gasoline, soap powder, polishing powder or hot
•
water should not be used to clean the transit box, as the above materials may damage painted surfaces and plastic
rubber parts. Be careful not to wipe plastic and rubber parts with volatile solvents such as gasoline.
Please reduce the time of opening the door as far as possible every time you access articles, so as not to cause
•
large fluctuations in the temperature inside the box.
After the door is opened, the temperature inside the box will rise sharply for a short time, which is a normal
•
phenomenon, and this situation will recover within a period of time after the door is closed.
Ice bank should be placed in a freezing environment and frozen for more than 4 hours and can only be used when
•
they become solid. When in use, firstly put the load into the transit box behind precooler, or take the sensor out and
sandwich it between precooling loads, then put the frozen ice bank into the upper layer.
If the transit box is equipped with an indicator, it can display the temperature inside the box. Please replace the
•
battery of the same model in time in case the power is found to be insufficient.
3
Advertisement
