Bosch BDU336Y Owner's Manual page 281

the wheels of the eBike are not in contact with the
ground while using the push assistance.
To start walk assistance, press the (6) button for
more than 1 s and keep it pressed. The battery
charge indicator (13) goes out and a white moving
light in the direction of travel shows that it is ready.
To activate walk assistance, one of the following ac-
tions must occur within the next 10 s:
– Push the eBike forwards.
– Push the eBike backwards.
– Perform a sideways tilting movement with the
eBike.
After activation, the motor begins to push and the
continuously filling white bars change color to ice-
blue.
If you release the (6) button, walk assistance is
paused. You can reactivate walk assistance within
10 s by pressing the (6) button.
If you do not reactivate walk assistance within 10 s,
walk assistance automatically switches off.
Walk assistance is always ended if:
– the rear wheel jams;
– the bicycle cannot move over ridges;
– a body part is blocking the bike crank;
– an obstacle continues to turn the crank;
– you start pedaling;
– the (4) button or on/off button (12) is pressed.
Walk assistance has a roll-away lock, which means
that even after successfully using walk assistance, the
drive system actively brakes backwards rolling for a
few seconds and you cannot push the eBike back-
wards or can only do so with difficulty.
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
Establishing a smartphone connection
In order to be able to use the following eBike func-
tions, a smartphone with the eBike Flow app is re-
quired.
Connection to the app occurs via a Bluetooth® con-
nection.
Bosch eBike Systems
1. Switch on the eBike system and do not start riding
the eBike.
2. Begin Bluetooth® pairing by long pressing (> 3 s)
the on/off button (12). Release the on/off but-
ton (12) as soon as the lowest bar on the battery
charge indicator (13) shows the pairing process
by flashing blue.
3. Confirm the connection request in the eBike Flow
app.
Activity tracking
In order to record activities, it is necessary to register
and log into the eBike Flow app.
To record activities, you must consent to the storage
of your location data in the app. Without this, your ac-
tivities cannot be recorded in the app. For location
data to be recorded, you must be logged in as the
user.
<eBike Lock>
<eBike Lock> can be activated for all users via the
eBike Flow app. A key to unlock the eBike is saved on
the smartphone for this purpose.
<eBike Lock> is automatically active in the following
cases:
– When switching off the eBike system via the operat-
ing unit
– When automatically switching off the eBike system
– By removing the on-board computer
The eBike is unlocked when the eBike system is
switched on and the smartphone is connected with
the eBike via Bluetooth®.
<eBike Lock> is connected to your user account.
Should you lose your smartphone, you can log in via
another smartphone using the eBike Flow app, and
unlock your user account and the eBike.
Warning! If you select a setting in the app that leads
to disadvantages for the <eBike Lock> (e.g. deletion
of your eBike or user account), then you will first be
shown warning messages. Please read through
these thoroughly and adhere to the warnings that
are issued (e.g. before deleting your eBike or user
account).
English – 11
0 275 U07 3RC | (29.03.2022)