To remove from the TV:
≥
H
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
42-inch model
48-inch model
1 Remove the cover E.
2 Remove the assembly screws B from the pedestal.
3 Pull out the pedestal from the TV.
55-inch model
65-inch model
1 Remove the cable cover H.
2 Remove the assembly screws G from the pedestal.
3 Pull out the pedestal from the TV.
14
English
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
≥
Holes for wall-hanging bracket installation
Rear of the TV
a
b
(View from the side)
Depth of screw
42-inch model
minimum: 8 mm
maximum: 24 mm
48-inch model
minimum: 10 mm
maximum: 31 mm
55-inch model
minimum: 12 mm
maximum: 39 mm
Diameter of screw
M6
Screw for fixing the TV onto the wall-
hanging bracket (not supplied with the
TV)
Warning
Using other wall-hanging brackets, or installing a wall-
≥
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure the
wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
Carefully read the instructions accompanying optional
≥
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
≥
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
≥
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
≥
wall position when it is no longer in use.
42-inch model
a: 200 mm
b: 200 mm
48-inch model
55-inch model
65-inch model
a: 300 mm
b: 300 mm
65-inch model