Hitachi GR4000 Series Quick Start Manual page 20

GR4000 Quick Start Guide, Revision 1 - Preliminary
●RS-232C Cross Cable
The RS-232C cable, a cross-cable having a D-sub 9 pin (female) on each end, is required to connect the GR4000
to a setup terminal.
●Interface Cable
Interface cables are necessary to connect GR4000 to other devices. See the GR4000 Hardware Installation
Guide for detail information about interface cables.
●DC Power Cables
DC power cables should be attached to the power supply units of GR4000-80E2，GR4000-160E2 and GR4000-
320E(DC). See the GR4000 Hardware Installation Guide for detail information about DC power cables.
4
QSGGR4K00-10 5794047-1X