Apex1000 File Of Files - Motorola APEX1000 Installation And Operation Manual

Typical APEX1000 BOOTP Packet Files
The BOOTP packet file mix is not fixed, as files are added/removed consistent with
APEX1000 functionality enhancements.
The following table shows a typical list of files:
Filename
Apex1000.fof
apex.cod
apex.ini
apexbcmr.ini
mux.rbf
gigeapp.bin
apex.jar

APEX1000 File of Files

#----------------------------------------------------------
---------
# APEX1000 Software File-Of-Files
#
# DESCRIPTION:
# APEX File-of-Files.
#
# FORMAT:
# ---------SOURCE--------- -------DESTINATION------- -
FLAGS---
# <boot server file name and path>
path>
# <flags>
#
# Note: File names must be in the standard DOS 8.3
format, i.e.,
# the "xxxxxxxx.xxx" format. The full path and file name
must be
# stated explicitly without the use of wildcards.
#----------------------------------------------------------
---------
# APEX Application Image File
Appendix C • Initialization Information
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Purpose
(File of files) Contains three field columns: source path, destination path, and force
flag.
Do not change the symbolic name of the APEX1000 in the second field, as it can
cause an initialization failure.
Host application code for main APEX1000 processor.
Contains APEX1000 configuration settings for application firmware.
Remapping configuration settings — holds configuration settings when the
APEX1000 is internally controlled (for example, Manual Routing, UDP Mapping).
Field programming gate array personality file for Mux.
Executable code for GigE processor.
Executable APEX1000-EM Java based application.
<unit file name and
B
297