Stopping Clearing Snow - Yamaha YS928J Owner's Manual

OPERATION

STOPPING CLEARING SNOW

1. Release the drive clutch lever. The
auger rotation stops, and the Snow-
blower stops moving.
1. Drive clutch lever
2. Move the shift lever to the "N" (Neutral)
position.
1
1. Shift lever
2. "N" (Neutral)
TIP
To protect the auger and impeller from
freezing, allow them to idle by holding the
drive clutch lever and pulling the auger
clutch lever. This will clear any snow inside
of them.
2
– 37 –
3. Release the drive clutch lever. Release
the auger clutch lever at the same time.
2
1. Drive clutch lever
2. Auger clutch lever
4. Move the throttle lever to the "SLOW
" position.
1