Erasing A Sensor From A Zone - GE 45131 User Manual

Step 3 – Release all buttons.
Note: Zone 4 is for dedicated alerts only. Sensors in this Zone
will not trigger an alarm or chime.
Step 4 – Activate the Window/Door Sensor
- For the Window/Door Sensor, separate the two
pieces or if mounted, open the door or window.
1 2
Zone
Erasing the Sensor from a Zone
Note: If you need to remove the Sensor from a Zone, the
system will erase the entire Zone, so any other Sensors will
need to be put back into that particular Zone.
Step 1 - To erase a Zone, press and hold the
Learn button on the Control Center. The unit will
beep once.
Step 2 - While holding the Learn button, press and
hold the Zone button to be erased. After five
seconds the Control Center will sound two beeps
and the Zone LED indicator will flash twice.
Step 3 - Release all buttons.
Step 2
Select the Zone number
1 2 3 4
3 4
Arm
Armed Power
9
Step 1
Press and hold
the Learn button
for three seconds
Input DC 12V
-
+
Step 3
Mute
Activate the Sensor
Learn
Alert
Chime
Off