Advertisement
Fundamental safety instructions
WARNING
Electric shock if there is no ground connection
For missing or incorrectly implemented protective conductor connection for devices with protection class I, high
voltages can be present at open, exposed parts, which when touched, can result in death or severe injury.
Ground the device in compliance with the applicable regulations.
WARNING
Electric shock due to connection to an unsuitable power supply
When equipment is connected to an unsuitable power supply, exposed components may carry a hazardous
voltage. Contact with hazardous voltage can result in severe injury or death.
Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV- (Protective Extra Low Voltage)
output voltages for all connections and terminals of the electronics modules.
WARNING
Electric shock due to equipment damage
Improper handling may cause damage to equipment. For damaged devices, hazardous voltages can be present
at the enclosure or at exposed components; if touched, this can result in death or severe injury.
Ensure compliance with the limit values specified in the technical data during transport, storage and operation.
Do not use any damaged devices.
SINAMICS V50 converter
2
Operating Instructions, 04/2022, FW V1.0, A5E44777205B AB
Advertisement
