Procedures And Settings Before Operation; Procedures Before Operation - Mitsubishi Electric A1S66ADA User Manual

4 PROCEDURES AND SETTINGS BEFORE OPERATION

4 PROCEDURES AND SETTINGS BEFORE OPERATION
The procedures before operation, handling precautions, name and setting for each
area, wiring, etc. will be explained below.

4.1 Procedures before Operation

The procedures before the operation of the module are shown in Fig. 4.1 below.
4 - 1
Start
Module installation
• Install the A1S66ADA in the appropriate slot.
Wiring
• Perform wiring for A1S66ADA and external
devices.
Offset/Gain Settings
• Set the offset values and gain values for the
channels to be used.
Programming, Debugging
• Create and check programs for reading and
writing to the A1SA66ADA from the PC CPU.
End
Fig. 4.1 Procedures before operation
MELSEC-A
Refer to Section 4.5
Refer to Section 4.6
Refer to Chapter 5
4 - 1
4