Software Requirements; Table 6 Check Point Ip2450 Disk-Based Security Platform Software Requirements - Nokia Check Point IP2450 Installation Manual

Security platform
Table of Contents

Advertisement

Warning
On IP2450 intended for shipment outside of the United States, the cord set might be
optional. If a cord set is not provided, use a power cord rated at 10A, 250V, maximum 15
feet long, made of HAR cordage and IEC fittings approved by the country of end use.
Warning
Replacement of fuses replaceable only by service personnel.
Caution
Replace the battery only with the same or equivalent type battery recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's instructions.
Caution
Do not block any of the ventilation holes on the appliance. The components might
overheat and become damaged.
Note
A readily accessible disconnect device shall be incorporated in the building installation
wiring.
Note
Installation instructions indicate listed circuit breaker or branch rated fuse, rating, number of
poles, and special characteristics.

Software Requirements

Table 6
IP2450 appliances.

Table 6 Check Point IP2450 Disk-Based Security Platform Software Requirements

Platform
Check Point
IP2450
Check Point IP2450 Security Platform Installation Guide
and
Table 7
describe operating system and applications requirements for the Check Point
Check Point
IPSO Version
v4.2 or later
Software
Check Point VPN-1 versions compatible with the version of Check
Point IPSO you are using
Software Requirements
27

Advertisement

Table of Contents
loading

Table of Contents