14
en | System setup - hardware
3.5
Turning on the system
The last thing to be done is to provide input power to the system.
To turn on the system:
1.
2.
2013.10 | V1 | DOC
Plug the power cord from the power supply unit into a high-quality power strip that offers
protection from electrical noise and power surges. We recommended using an
uninterruptible power supply (UPS).
Press the power button on the control panel to turn on the system.
Quick Installation Guide
DIVAR IP 7000 1U
Bosch Sicherheitssysteme GmbH