HP xp8010 series Reference page 15

RS-232 keyword listing
Keyword Parameters
IPAD ?
SNUM ?
Power and status functions
SHDN None
W None
RS-232 protocol reference
(continued)
Description
Queries the IP addresses associated with the connectivity
module. The notification takes this form:
*IPAD=IP_addr_1, IP_addr_2
where:
• IP_addr_1 = the IP address of the module's LAN
connector.
• IP_addr_2 (if present) = the IP address of a wireless
network card connected to the connectivity module.
For example: *IPAD=15.7.123.54, 15.7.123.55
Queries the projector's serial number.
Puts the projector into cool-down state, and later into
standby state. The projector sends a notification when it
enters cool-down state (STAT=3), and another when it
enters standby state (STAT=0).
Note: This keyword requires the projector to be in its on
state (STAT=1).
Note: Do not send any requests other than STAT in the time
between the cool-down and standby state notifications.
Otherwise, unexpected results can occur.
Puts the projector into warm-up state, and later into on
state. The projector sends a notification when it enters
warm-up state (STAT=2), and another when it enters the on
state (STAT=1).
Note: This keyword requires the projector to be in standby
state (STAT=0).
Note: Do not send any requests other than STAT in the time
between the warm-up and on state notifications.
Otherwise, unexpected results can occur.
15