HP Vectra VL6 7 Installation Manual page 20

c905.bk : ch_6.fb4 Page 3 Thursday, October 22, 1998 9:51 AM
21 Highlight the "TCP/IP" network component and click on the "Properties"
button.
22 If you know your TCP/IP settings, enter them in the "TCP/IP Properties"
dialog box, otherwise leave the IP address choice checked "Obtain an IP
address automatically", and click "OK" . (If you do not have the required
information, contact your network administrator.)
23 Click on "Close", and files will copy.
24 Insert the Windows 95 CD-ROM, and click "OK" to the "Insert Disk" dialog
box.
25 When prompted, enter the path for Windows 95 source files and click on
"OK" in the "Copying Files..." dialog box. (If you have an HP preloaded
HDD, set the path statement C:\MASTERS\WIN95\SYSTEM\CABS\").
If you are using a Vectra VL8, go directly to step 26.
If you are using a Vectra VL7, follow the instructions below to complete
the installation.
• Click on "OK" to the "Insert Disk" dialog box.
• Set the path to "A:\" and click on "OK." (If you have an HP preloaded
HDD, set the path to "C:\MASTERS\LAN\3C905\DISK1\")
• Click on "Yes" to finish the Setup installation and restart your comput-
er to the "System settings Change" dialog box.
26 Click on "Yes" to finish the Setup installation and restart your computer
to the "System settings Change" dialog box.
Connecting to a Windows NT Server 3.51
Microsoft Windows 95 SR2