Panasonic HL-CK632B Operating And Installation Instructions page 28

Table of Contents

Advertisement

Cleaning and Maintenance
Stop using the product when any abnormality/failure occurs and turn 'OFF' the
isolating switch and the circuit breaker. (Risk of smoke/fire/electric shock)
Contact a Panasonic Authorised Service Centre immediately for maintenance/repair.
Cure Your Appliance When Needed
If a fault occurs, before calling the after-sales service, please ensure that is not because of
incorrect operations and refer to the fault table, attempt to correct the fault yourself.
You can often easily rectify technical faults on the appliance yourself.
If a dish does not turn out exactly as you wanted, you can find many tips and instructions for
preparation at the end of the operating manual.
Fault
The appliance
does not work.
Knobs have fallen
out of the support
in the control
panel.
Knobs can no
longer be turned
easily.
Fan does not work all the time in the
mode: "Convection"
After a cooking process a noise can
be heard and air flow in the near of the
control panel can be observed.
28
WARNING
Possible Cause
Faulty fuse.
Power cut
Knobs have
been accidentally
disengaged.
There is dirt under
knobs.
Notes/remedy
Check the circuit breaker in the fuse box.
Check whether the kitchen light or other
kitchen appliances are working.
Knobs can be removed.
Simply place knobs back in their support in the
control panel and push them in so that they
engage and can be turned as usual.
Knobs can be removed.
To disengage knobs, simply remove them from
the support.
Alternatively, press on the outer edge of knobs
so that they tip and can be picked up easily.
Carefully clean the knobs using a cloth and
soapy water.
Dry with a soft cloth.
Do not use any sharp or abrasive materials.
Do not soak or clean in the dishwasher.
Do not remove knobs too often so that the
support remains stable.
This is a normal operation due to the best
possible heat distribution and best possible
performance of the oven.
The cooling fan is still working, to prevent
high moisture conditions in the cavity and cool
down the oven for your convenience. The
cooling fan will switch off automatically.

Advertisement

Table of Contents
loading

Table of Contents