Setup Workflow - Canon VB-C50i/VB-C50iR User Manual

Setup Workflow

The flow for setting up and checking the camera's images involves performing various settings
after the device is set up and your PC and the network are connected via the hub. Then, check to
see if you can display images from the camera.
1 S e t up the c ame ra
Set up the device.
Make sure the device is set up properly (→ P.2-4).
VB-C50i
Hub
3 P e r fo r m i niti al s ettings f or the ca me ra
Insert the CD-ROM provided into your
PC and perform initial settings following
instructions on the screen (→ P.2-7).
2-2
2 Connect the c a me ra to th e ne t wor k
Connect the camera and your PC via the hub (→ P.2-6).
LAN cable
Supplied CD-ROM