2.
Grasp the edge of the memory module (2), and then pull it out of the memory module slot.
NOTE:
memory module slot.
Reverse this procedure to install the memory module.
RTC battery
Description
RTC battery
Before removing the real-time clock (RTC) battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Service access cover (see
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
Battery on page
33).
Service access cover on page
Spare part number
622351-001
36).
Component replacement procedures
47