(1) Setting the Ethernet parameters (word position)
Confirm the word positions and set each in the Ethernet parameters with the following method.
Underlined section : Input by user. Italicized section : Differs according to user. Confirm the setting
before inputting.
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Select the MS-DOS prompt
from the NC computer "Task
Manager".
2)
Using the ftp command, log
into the host computer.
ftp IP address
(Example)
c: \windows>ftp 150.46.0.16
3)
Input the user name for
logging in.
User name
(Example)
User (150.46.0.16 : (name)): m6
4)
Input the password.
Pasword
(Example)
Password : m6
5)
Display the directory list.
ftp>dir
6)
Confirm the file name
position, size display position
and <DIR> position in step 5).
7)
Log off.
ftp>by
search engine
3. Setup Screens
The MS-DOS window will appear.
Display on MS-DOS window :
Connected to 150.46.0.16
220 mspc 150 FTP server (SunOS 4.1) ready
User (150.46.0.16 : (name) :
Display on MS-DOS window :
331 Password required for m6.
Password :
Display on MS-DOS window :
230 User m6 logged in.
Display on MS-DOS window :
02-21-97
07:27PM
08-25-97
06:05PM
01-27-97
10:03AM
02-04-97
11:05AM
Word
Number of
position: 1
words: 2
(Comment)
(Comment)
File name position
Size display position
<DIR> display position
Word position (comment) : 1
No. of words (comment) : 2
Display on MS-DOS window :
c: \windows>
I – 171
<DIR>
bin
1916
prjopn.dat
<DIR>
NcPrograms
1850880
m6mmi.exe
<DIR> : 3
Size : 4
File name
position: 5
: 5
: 4
: 3