Panasonic Blu-ray Disc DMP-UB320 Operating Instructions Manual page 25

Picture
∫ Still Mode
Select the type of picture shown when you pause
playback.
Automatically selects the type
Automatic
of picture shown.
Select if jittering occurs when
Field
"Automatic" is selected.
Select if small text or fine
patterns cannot be seen
Frame
clearly when "Automatic" is
selected.
∫ Seamless Play
This enables smooth playback of the gaps
between pieces of content such as programmes.
≥ The expected effect may not be achieved
depending on the content.
≥ If you select "Off", playback will be accurate, but
the picture may freeze for a moment.
Reference
Sound
∫ Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ "Automatic" is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
Dolby Audio
DTS/DTS-HD
MPEG Audio
Select the audio signal to output.
≥ Select "PCM", when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If "Off" is selected, the unit outputs the primary
audio only.
≥ To enjoy BD-Video that supports Dolby Atmos
DTS:X
TM
Connect this unit to an AV amplifier or similar device that
supports it with an HDMI cable, and select the following
settings:
– Dolby Audio: "Bitstream"
– DTS/DTS-HD: "Bitstream"
– BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
- 25 -
or
®