D-Link DIR-615 User Manual page 32

Wireless n 300 router

Hide thumbs Also See for DIR-615:

Table of Contents

Section 4 - Configuration

All Settings

Connection Type:

Select your connection type from drop-down menu:

For Dynamic IPv4 refer to page 21.

For Static IPv4 refer to page 24

For Dynamic IPv6 refer to page 27

For Static IPv6 refer to page 30

For PPPoE refer to page 33

For PPPoE IPv6 refer to page 37

For PPPoE Dual Stack refer to page 42

For PPTP refer to page 47

For L2TP refer to page 51

Note: this option can only be edited in the WAN/Creating mode.

Enable

Toggle this switch to enable the connection. This is enabled by default.

Connection:

Disabling this feature may disable your Internet connection.

IPv6

Get IPv6:

Choose Automatically, IPv6 by DHCPv6, by SLAAC, or DHCPv6 PD

according to the type of IPv6 is used by your ISP. The default setting

is Automatically.

Gateway by

Toggle this switch to obtain gateway information through SLAAC.

SLAAC:

If Gateway by SLAAC is disabled, specify the Gateway IPv6 address

Gateway IPv6

address:

here.

Obtain DNS

Toggle this switch to obtain DNS information automatically.

server addresses

automatically:

D-Link DIR-615 User Manual

Dynamic IPv6 (cont)

Table of Contents