Using Noise Cancelling - Panasonic RB-M700 Owner's Manual

Using noise cancelling

Setting noise cancelling to ON changes the volume and sound quality.
The sound quality is set to the optimum.
1
Set the [NC] switch to ON.
• While using the noise cancelling function, the noise cancelling LED
lights in green.
2
Adjust the volume of the playback device.
Note
• While using the noise cancelling function, a very small amount of noise which is generated from the circuit that
reduces noise may be heard, but this is normal and not indicative of any trouble. (This very-low-level noise may be
heard in quiet places or in the blank parts between tracks.)
• Howling may occur if you push the ear pads too strongly into your ears. Do not use the ear pads while continuously
pushing them in.
• It is possible to switch the language of the audio guidance. (
Operation
l
16, "Guidance messages")
15