Double-Feed Detection Conditions - Fujitsu FI-4530C Operator's Manual

6.5

Double-feed Detection Conditions

Select one of the following:
• Check overlapping
• Check length
• Check overlapping and length
The following condition is required when any of the above options is selected:
■ Check overlapping
Paper weight
Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the doc-
ument.
Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the doc-
ument.
■ Check length
Document length deviation
Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the doc-
ument.
■ Check overlapping and length
Paper weight
Document length deviation
Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the doc-
ument.
Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the doc-
ument.
108
2 2
52 g/m - 127 g/m
1 % or less
2 2
52 g/m - 127 g/m
1 % or less